Reichert
LensChek Pro
Digital lensometer with automatic reading lock-in, plus built-in PD measurement and UV transmittance analysis.
Overview
LensChek Pro reads lens power the moment the target aligns with the optical center, locking the measurement automatically, which Reichert describes as fast, repeatable and reliable. The Pro model adds two measurements the standard LensChek Plus does not have: pupillary distance from 45 to 85 mm, and UV transmittance from 0 to 100 percent, measured at 375 nm. It is part of the VisionChek Digital Exam Suite alongside SightChek and OptoChek Plus.
Key capabilities
Automatic lock-in of readings at optical center alignment
Built-in PD measurement
UV transmittance measurement at 375 nm
Compact footprint with an intuitive interface
Part of the VisionChek Digital Exam Suite
Technical specifications
Figures below come from current Reichert product material. Confirm configuration-specific details with us before purchase.
| Sphere | -25 to +25 D in 0.01, 0.12, or 0.25 D steps |
|---|---|
| Cylinder | 0 to ±10 D |
| Axis | 1 to 180 degrees in 1 degree steps |
| Add | 0 to 10 D |
| Prism | 0 to 10 prism diopters in 0.01, 0.12, or 0.25 steps |
| Accuracy | Sphere ±0.25 D within ±10 D, ±0.50 D beyond; cylinder ±0.25 D |
| UV transmittance | 0 to 100% in 5% steps at 375 nm |
| PD measurement | 45 to 85 mm in 0.5 mm steps |
| Measurement wavelength | 630 nm |
Who this is a good fit for
If none of these describe your practice, it is probably not the right choice, and we will tell you that.
Optical departments verifying finished eyewear
Practices that quote UV protection and want to demonstrate it
Offices replacing a manual lensometer with staff-friendly automation
What to ask on a demo
A demo is worth more when you arrive with your own cases and a list of questions. Here is what we would raise.
- Have a non-optician staff member neutralize a progressive
- Compare Pro and Plus models; the difference is PD and UV measurement
- Ask how readings transfer to your EMR or phoropter
How Blue River Medical supports the LensChek Pro
Equipment consultation and model selection
On-site or in-office demo
Installation coordination
Staff training
Workflow planning around your existing lane
Ongoing customer support and service coordination
Trade-in discussions when you are replacing equipment
We serve eye care practices across Colorado, Arizona, New Mexico, Wyoming, and Utah. Service and repair responsibility differs by manufacturer and model, so ask us what we handle directly and what we coordinate with the manufacturer. See service and maintenance for our general equipment service capabilities.
For the manufacturer's own material, see the official Reichert product page.
Related products
Reichert
OptoChek Plus
Combined auto refractor and keratometer with pupil size measurement, built-in printer, and EMR connectivity, from the VisionChek Digital Exam Suite.
Learn moreReichert
SightChek Digital Phoroptor
Reichert's value-tier digital phoroptor, part of the VisionChek Digital Exam Suite, with a wide refraction range and remote refraction support.
Learn moreReichert
Phoroptor VRx
Reichert's flagship digital refraction system: a thin, quiet, hand-assembled American refractor with fast lens exchanges and deep EMR connectivity.
Learn moreRequest Information
Ask about LensChek Pro pricing, schedule a demo, or start a trade-in conversation. We will come back with specifics for your practice.
Prefer to call? We are here to help.
Call Us: (877) 707-5688