Visionix
Visionix VX 40 Pro
One-touch auto-lensmeter and lens verifier that validates finished spectacles against prescription data in about 30 seconds.
Overview
The VX 40 Pro is the verification-focused member of the VX 40 family. Where the VX 40 analyzes a lens and shows you what it is, the VX 40 Pro validates a finished pair against the prescription data and tells you whether the job is right. It runs fully automated in about 30 seconds and works stand-alone, or connects to a Briot Couture or WECO E7 edger so final inspection becomes part of the finishing workflow rather than a separate manual step. Visionix previously marketed this device as the VX 40 Couture, so older literature and quotes may use that name.
Technical highlights
Key capabilities
Validates single vision, progressive and bifocal lenses against prescription data
Fully automated verification in about 30 seconds
Detects most lens types including bifocal, progressive, freeform and single vision
Compatible with virtually every lens technology and brand
One-touch operation, with automatic left and right eye movement
Connects to a Briot Couture or WECO E7 for automated final inspection
Runs stand-alone when it is not connected to an edger
VX 40 or VX 40 Pro?
They answer different questions, and a practice can reasonably want either or both.
- VX 40 analyzes the lens. Wavefront measurement maps power across the whole surface and shows it as a topographic map, which is what you want when you are investigating a non-adapt or checking a progressive design.
- VX 40 Pro verifies the job. It checks a finished pair against the prescription data and is built around final inspection, including edger integration.
- If your question is what is this lens doing, that is the VX 40. If your question is did this job come back correct, that is the VX 40 Pro.
Where edger integration matters
Stand-alone, the VX 40 Pro is a fast one-touch verifier. Connected to a Briot Couture or WECO E7, final inspection becomes part of the finishing run instead of a separate station and a separate handoff. If you do not have one of those edgers, the integration is not a reason to choose this model, and we will say so.
A note on naming
The VX 40 Pro was previously marketed as the VX 40 Couture. If you are comparing an older quote or brochure, check which name it uses before comparing prices. Ask us to confirm the configuration on any quote you are weighing.
Who this is a good fit for
If none of these describe your practice, it is probably not the right instrument, and we will tell you that.
Practices with an in-house finishing lab running a Briot Couture or WECO E7
Opticals where final inspection is the bottleneck before dispensing
Offices that want verification against the prescription rather than a reading to interpret
Practices standardizing final inspection so any staff member gets the same answer
What to ask on a demo
A demo is worth more when you arrive with your own cases and a list of questions. Here is what we would raise.
- Bring finished jobs, including a remake you rejected, and verify them
- Confirm whether it connects to the edger you actually run
- Time final inspection against your current process
- Have the staff member who does final inspection run it
- Clarify whether you are being quoted the VX 40 or the VX 40 Pro
How Blue River Medical supports the Visionix VX 40 Pro
Equipment consultation and model selection
On-site or in-office demo
Installation coordination
Staff training
Workflow planning around your existing lane
Ongoing customer support and service coordination
Trade-in discussions when you are replacing equipment
We serve eye care practices across Colorado, Arizona, New Mexico, Wyoming, and Utah. Service and repair responsibility differs by manufacturer and model, so ask us what we handle directly and what we coordinate with the manufacturer. See service and maintenance for our general equipment service capabilities.
Other Visionix and Optovue systems
Visionix
Visionix VX 40
Automated wavefront lens analyzer that maps power across the whole lens and completes a full analysis in about 30 seconds.
Learn moreVisionix
Visionix VX 65
Digital refraction system with three interface modes that integrates with EMR and third-party instruments.
Learn moreVisionix
Visionix Eye Refract
Binocular refractor that measures objective refraction on both eyes at once and works toward a physiological prescription.
Learn moreRequest Information
Ask about Visionix VX 40 Pro pricing, schedule a demo, or start a trade-in conversation. We will come back with specifics for your practice.
Prefer to call? We are here to help.
Call Us: (877) 707-5688